EXFO FTB/IQS-85100G Packet Blazer for FTB-500/IQS-600 - Manual (Page 137)

Test Setup - Test Configurator, Timer, and System
Packet Blazer 127
Services - Profile
Total TX Rate
Note: Only available when the Service Performance Test check box is selected
(see EtherSAM - Global on page 79).
Indicates the total transmit rate of all services enabled for transmission.
Unit selection is available from the SLA Parameters on page 131.
Profile

Profile button allows to select the emulation profile. The selected
service profile icon, name, and configuration (when applicable) is
displayed next to the Profile button.
Select the emulation profile: Voice, Video, or Data (default).
Voice

Voice Codec choices are VoIP G.711 (default), VoIP G.723.1, and
VoIP G.729.

Number of Calls allows the selection of the equivalent number of
calls that will be generated for the selected stream (default is 1).

CIR indicates the committed information rate in Mbps based on
the number of calls selected.
Video

Video Codec choices are SDTV (MPEG-2) - (default),
HDTV (MPEG-2), and HDTV (MPEG-4). Only SDTV (MPEG-2) is
available with the 10 Mbps interface.

Number of Channels is the equivalent number of channels that
will be generated for the selected service (default is 1).

CIR indicates the committed information rate in Mbps based on
the number of channels selected.