beautypg.com

EXFO FTB/IQS-85100G Packet Blazer for FTB-500/IQS-600 User Manual

Page 103

background image

Test Setup - Test Configurator, Timer, and System

Packet Blazer

93

Interface (Ethernet)

Optical lane numbers are from 0 to 3 or from 0 to 9 depending on the
selected interface/rate.

All Lanes check box, when selected, applies the change(s) to all
optical lanes at once.

Optical Lane indicates the optical lane numbers and All which
represents the setting for all optical lanes when the All Lanes
check box is selected.

Laser check box, when selected, indicates that the corresponding
optical laser lane is activated and emitting an optical laser signal.

Lasers OFF at Start-Up allows to automatically turn off all lasers when
starting the module or when switching from one test application of the
same group (Ethernet or Transport) to another.

Power Range (dBm) indicates the CFP/ operational RX power range.