EXFO FTB/IQS-85100G Packet Blazer for FTB-500/IQS-600 - Manual (Page 254)

Test Results
244 FTB/IQS-85100G
Traces - SONET/SDH
Traces - SONET/SDH
From the Test menu, tap Results, Traces, and the SONET/SDH sub-tab.
Note: Selecting a Trace byte to be generated will automatically update the
corresponding OH byte. Refer to OH - SONET/SDH on page 291 for more
information.
Traces

Section/RS (J0) and STS/AU/TU-3 Path (J1)
Displays the received J0/J1 value in 16 or 64-bytes format. The
represents the CRC-7 for a 16-bytes format. The last two bytes of a
64-bytes format,
R
> and
F
>, represent respectively a carriage
return and a line feed.

TIM-S/RS-TIM, TIM-P/HP-TIM: Enables the corresponding Trace
Identifier Mismatch for the expected message defined. These settings
are coupled with the Traces configuration from Traces (SONET/SDH)
on page 162.
Copy RX allows to use the received TIM message as the expected one.
TCM Access Point Identifier
Note: Available when TCM is enabled (refer to page 142).

STS/AU/TU Path (N1)
Displays the received N1 value.

TC-TIM-P/HPTC-TIM: Enables the corresponding TCM Access Point
Identifier for the expected message defined. These settings are
coupled with the Traces configuration from Traces (SONET/SDH) on
page 162.
Copy RX allows to use the received TIM message as the expected one.