Haltech E8 - Manual (Page 70)

Haltech E11/E8 Instruction Manual
Water Injection Activation
To help improve the detonation resistance of an engine, water injection is sometimes used. The water
helps to cool the intake charge and increase the resistance to detonation when it forms a vapour in the
combustion chamber. The water injection is activated by the following parameters.
Figure 78 - Water Injection Control Output
• Load - The water injection enables when the load rises above this value.
• RPM - The water injection enables when the engine speed rises above this RPM.
• Air Temp - The water injection enables when the air temperature rises above this temperature.
The water injection output activates when all the above parameter conditions are met.
Page: 70 Copyright © Haltech 2008