Futaba 18MZ 2.4GHz - Manual (Page 96)

96
Altitude Display
Home2 Display
Three telemetry data can be displayed on Home2
screen. The item to display can be set up.
● If Altitude becomes higher than the
Altitude set here, the alarm will operate.
● If Preset is pushed, the present
atmospheric pressure = altitude
of 0 m.
● Altitude Display
● Atmospheric pressure Display
● Variometer Display：How many meter rise (descent) in 1 second.
● Display of the maximum and
minimum ranges for Altitude.
[Clear] To reset.
● It is displayed by [ON]
Undisplayed is carried out in [OFF.] ● The slot number of the telemetry data displayed
on Home2 screen is set up.
● Press to setup an alarm type alert.
●Press to setup
vibration alerts.
4 t y p e s o f
v i b r a t i o n
selections are
possible.
●Return to Telemetry
Atmospheric pressure is measured by a sensor. The
actual altitude is measured in regards to the difference
between the ground and atmospheric pressure.
Atmospheric pressure when the power supply
of the altitude sensor is set to ON is displayed as a
standard (0 m).
[Reset] Push the button to re-set to a standard
altitude.
What altitude is it?
● It is selection of the
sensor displayed on
home 2 screen.