Futaba 18MZ 2.4GHz - Manual (Page 51)

51
85%
Camera
Thumbnail
Model1
Save to...
Shooting method
1. Turn on the transmitter and call [Camera]
from the System Menu.
2. Select the picture save destination. (T18MZ,
SD card, USB memory)
*Only when an SD card and USB memory are used will an
icon be displayed and this choice can be selected.
3. Point the camera at the back of the
transmitter toward the subject and press the
shutter button.
4. The picture can be checked with the
[Thumbnail] button. A picture can be copied
and deleted by pressing it.
Copy / Delete / Rename
1. [Thumbnail] button is pushed.
2. Data is chosen from Thumbnail.
3. Copy / Delete / Rename is chosen from a
right display.
4. Next, it chooses in [Yes] and [No]. In Rename,
name is inputted into the keyboard which
appeared, and, finally it pushes Enter.
Display pictures at the model data
1. Call [Camera] from the System Menu.
2. Make the save destination the same place
as model data. If an SD card or USB memory
is not connected, the T18MZ becomes the
initial state.
3. Take the picture you want to display with the
T18MZ.
(Position the picture inside the frame.)
4. Select the model whose picture you want to
paste beforehand.
5. Press [Thumbnail] and then press the picture
you took earlier.
6. Press[Entry].
7. The message “Sure?” is displayed. Press [Yes].
Camera Camera photography and picture storage
Pictures can be easily taken with the camera
in the T18MZ. The picture can be saved to the
T18MZ, SD card, and USB memory. Your favorite
model photographed by you can be displayed on
the Home screen, Start screen, and Model Select
screen.
● Call the following setting screen by pressing the
[Camera] button in the System Menu.
●Return to System Menu
●Picture data save destination (T18MZ, SD card, USB memory)
●To the thumbnail screen to view all pictures.
●shutter button