Futaba 18MZ 2.4GHz - Manual (Page 38)

38
22:15:10
User Menu
T18MZ has a menu for each of the following:
System, Linkage, and Model. Also, you can
create a personalized User Menu that can include
all of the menus that you use most often.
The User menu can be created by pressing the
Rotary Key.
How to make a User Menu
1. From the home screen, press the Rotary
key for 2 seconds.
2. Touch here to select your first choice.
3. Once pressed, 4 pages of choices will be
displayed.
4. Make your selection, press your choice
and the first of your "User Menu" will be
entered.
● Return to home screen
● Return to home screen
● Return to home screen
● Return to User Menu
● To erase a selection from your User Menu, highlight the desired
menu and press Release. This will remove it from your personal
User Menu, but not from the basic menu. You can always go
back at a later date and re-enter this into your User Menu.
●Three telemetry data can be displayed.
If three either is pushed, it will move to a telemetry screen.
Three displays can be changed on a telemetry screen.
*Any change made to data entered from the
User Menu or from the normal method of
use are the same. Changes made in either
way are saved into the transmitter memory.
Home 2 screen
If [Home2] is pushed, it will become the display to which the timer and the Telemetry data were
expanded.
Timer
If one of two timer
displays is pushed,
you will enter the
Timer screen of a
Linkage menu.