Futaba 18MZ 2.4GHz - Manual (Page 18)

18
Stick Adjustment
Adjustment of the stick lever angle
You can make fine adjustments to the angle of
a stick lever either inwards or outwards from the
center stick position.
●Screw
Use the attached 1.5mm hexagonal wrench
(inside stylus) to turn the screw clockwise to adjust
the stick outwards, or counter-clockwise to tilt it
inward.
N o t e : B e c a r e f u l n o t t o t u r n t h e s c r e w t o o f a r
counterclockwise as it could fall out.
Adjustment of the lever length
You can adjust the length of stick levers, as you
like. It is recommended to adjust the length of the
sticks in line with your hand size.
[How to adjust the Stick length.]
1. Hold the lever head "B" and turn the lever
head "A" counter-clockwise, the lock will be
released.
2. Adjust the stick lever to the desired length by
turning lever head A.
3 . Securely lock the stick lever by holding
lever head A and turning lever head B
counterclockwise.
Adjustment of Stick Lever Tension
You can adjust the tension of stick-levers.
The rubber cover in the back is removed first.