KEYENCE BL-700 Series - Manual (Page 94)

Chapter 4 Installing the Setup Software
80
4
4.6 List of Error Messages
The following table lists the error messages which may occur during operation of
the setup software.
Error message Contents
Errors during “Entered data is The entered data is incorrect. Re-enter the
setup incorrect. [OK]” correct data.
Errors during “Communication with Error during communication with the BL-700
communication BL-700 failed. [OK]” (for sending settings).
“Readout from BL-700 Error during communication with the BL-700
failed. [OK]”
(for reading settings).
“The specified model is The model set in the setup software is not the
incorrect. [OK]”
same as the model that is connected.
Errors file “Accessing file during No floppy disk is inserted.
editing rejected. [OK]” The floppy disk is write-protected.
The floppy disk is full.
“File not found. [OK]” The file name is incorrect. Enter a correct file
name.
“File name incorrect.
[OK]”