KEYENCE BL-700 Series - Manual (Page 64)

Chapter 4 Installing the Setup Software
50
4
4.1 Installing the Setup Software
This section describes the operating environment of the setup software and the
software installation.
4.1.1 Installing setup software
■ Hardware requirements
IBM PC/AT 100% compatible
CPU: 486 SX or higher
Memory: 4 MB or more
Floppy disk drive: 3.5 inch floppy disk drive (1.44 MB compatible)
Display: Resolution 640 x 480 or higher
Serial port: A minimum of one RS-232C port is required.
■ OS requirements
•
MS-Windows 3.1
• MS-Windows 95
4.1.2 Installation procedure
1. Insert the BL-700 setup software system disk into the floppy drive.
2. Perform the following procedure.
• Windows 3.1:
Execute “Run...” in the icon menu of the program manager.
• Windows 95:
Select “Run” from the "Start" menu.