KEYENCE BL-700 Series - Manual (Page 82)

Chapter 4 Installing the Setup Software
68
4
Utilities settings
The settings of OK/NG output ON time and preset data registration are available.
1. To set “OK/NG output ON time”, enter a numeric value from the keyboard from
1 to 255 (10 ms to 2.55 s).
2. When “Display STABILITY LEDs” is set, the BL-700 displays the STABILITY
LEDs which indicate the reading stability during normal reading operation.
3. To set “Preset data”, enter the preset data to be registered from the keyboard.
Normally, the data should be set within 32 characters. If CODE-C is set for
CODE128, up to 64 characters can be set.
• OK/NG output ON time
➮ P.32
• STABILITY LED
➮ P.44
• Preset data
➮ P.46
Tips