KEYENCE BL-700 Series - Manual (Page 119)

105
Chapter 6 PCL Link
6
6.1.2 Devices used for PLC link
The BL-700 supports the following PLC devices.
To use MELSEC-A series, select the data register or file register.
The available memory areas of the MELSEC-A or SYSMAC-C may be smaller than
the following data.
For details, see the instruction manual for the PLC being used.
The MELSEC-A series provides an extension file register.
When a block number is specified during the BL-700 setup, the specified extension
file register is used.
When “0” is specified for the block number, the extension file register of the block
number specified in the PLC program is used.
If no block number is specified (during the BL-700 setup and PLC programming),
the file register incorporated in the CPU is used.
Note: KV-300 is not available in Europe.
PLC Device name Memory area
KV-10/16 Data memory DM0000 to DM0999
KV-24/40/80 Data memory DM0000 to DM1999
KV-300* Data memory DM0000 to DM8999
MELSEC-A Data register DM0000 to D8191
File register DM0000 to R8191 (according to the setting)
SYSMAC-C Data memory DM0000 to DM6143