KEYENCE BL-700 Series - Manual (Page 101)

87
Chapter 5 Serial Communication
5
Read Data Format
Set the data format of the Header and Delimiter, respectively.
With the setup software, the following formats can be selected. Other than the
following formats, you can freely set up to 5 characters.
Header: (1BH), (02H), None
Delimiter: (0DH), (0DH) (0AH), (03H)
Read Error Code
If the BL-700 fails to read a bar code, the BL-700 sends back a read error code.
The initial setting of the read error code is as follows:
The read error code can freely be changed (within 8 characters).
The BL-700 can be set to send no error code.
➮ See P.57.
Header Read data Delimiter
Header ERROR Delimiter