FaxBack NET SatisFAXtion 8.6 - Manual User Manual
Page 222

4 – Appendices
NET SatisFAXtion 8.6 Manual
222
400H_400V
allowed_receive_transfer_types [string]: These settings control the type of
fax and file transfers that the driver can perform for a device. Format: Comma
separated list of the following. Default:
FAX,ECM,V34
.
FAX
ECM
V34
allowed_send_image_types [string]: These settings control the image types
that the device can send and receive via the T.30 protocol over the telephone
network. To receive or send some image types, the corresponding
allowed_receive
/
send_transfer_type
setting must include ECM. Format:
Comma separated list of the following. Default:
1D,2D,T6,JBIG
.
1D
2D
T6
JPEG
JBIG
COLOR
200H_400V
300H_300V
400H_400V
allowed_send_transfer_types [string]: These settings control the type of fax
and file transfers that the driver can perform for a device. Format: Comma
separated list of the following. Default:
FAX,ECM,V34
.
FAX
ECM
V34
audio_mode [string]: Enables certain behaviors during the G.711 µ-law portion
of a fax call. Format: Comma separated list of the following values. Default:
PLAY_CNG, RECORD, PLAY_CED
.
RECORD
– Specifies G.711 audio data received should be recorded to
disk as
.wav
file.
PLAY_CNG
– Specifies that a CNG tone will be played at the start of a
send fax.
PLAY_CED
– Specifies that a CED answer tone will be played at the
start of a receive fax.
audio_qos_token_rate [dword 0–65535]: TokenRate of sending RTP RSVP
FlowSpec. Default:
9250
.
audio_qos_peak_bandwidth [dword 0–65535]: PeakBandwidth of sending
RTP RSVP FlowSpec. Default:
13875
.
audio_qos_token_bucket_size [dword 0–65535]: TokenBucketSize of
sending RTP RSVP FlowSpec. Default:
680
.
audio_qos_latency [string]: Latency of sending RTP RSVP FlowSpec.
Default:
QOS_NOT_SPECIFIED
.
audio_qos_delay_variation [string]: DelayVariation of sending RTP RSVP
FlowSpec. Default:
QOS_NOT_SPECIFIED
.
audio_qos_ser vice_type [string]: ServiceType of sending RTP RSVP
FlowSpec. Default:
SERVICETYPE_GUARANTEED
.