FaxBack NET SatisFAXtion 8.6 - Manual User Manual
Page 203
4 – Appendices
NET SatisFAXtion 8.6 Manual
203
1D
2D
T6
JPEG
COLOR
200H_400V
300H_300V
400H_400V
dont_delete_zero_page_faxes [boolean]: By default the fax server
disregards non-fax calls: if there are zero pages received and no remote CSID
and this value is
false
, then the fax event will be deleted with no record that it
ever occurred. If
true
, the call will be logged and potentially a blank “fax” with
no fax image will be delivered to the user. Default:
false
.
dont_retry_errors [string]: This allows customization of the ICANFax send
retry policy. If fax sends fails due to an error that ICANFax normally does a retry
on, this setting can make that error not retry. Format: Up to 10 comma-
separated hexadecimal numbers.
emulate_cas_file_xfer
failed_send_retry_attempts [dword 0–255]: The number of retry attempts
to make when a fax send fails for any “retryable” reason. Retry attempts will not
occur for manual sends. For lists of error codes that represent “retryable”
errors, see
. Default:
3
.
fax_driver_name [string]: Device name that will override the key name that is
used for the fax device name. This needs to match a key or fax_device_name
from the driver specified by fax_driver_name. This would really only need to be
different when using the device# key name ordering option of ICANFax.
Format: One of the following values:
BOS_MAN
BT_MAN
CLASS1
CLASS2
GAMMAFAX
IP_FAX
PLUGIN_FAX_W32
SATISFAX
filebase_memory_only [boolean]: When the FILEBASE queue driver is
enabled, causes the queue to be stored in memory for maximum performance.
Provides zero recovery if the system were to be shutdown in a unfriendly
manner since the queue will be lost.
filebase_on [boolean]: Turns on/off the storage of queue files in an optimized
database. Provides no benefit for systems running with under 300 ports. Note
that the
bypass_filebase
setting overrides this one. Set
bypass_filebase
to
false
for this setting to have any effect. Default:
false
.
force_standard_resolution_sends [boolean]: When this setting is true,
then no matter whether a send fax is submitted to go out as FINE, it will always
be force to go out as coarse (aka standard) resolution. Default:
false
.
global_comm_state [string]: Enables ICANFax to send/receive when it is
loaded. The default is to not do either since higher level modules need to parse
the ICANFax queues without ICANFax interfering. Format: Comma-separated list
of
SEND
and
RECEIVE
. Default:
SEND, RECEIVE
.