Dynojet 424x: Installation Guide - Manual (Page 82)

In Ground Model 424x/424xLC 2 Automotive Dynamometer Installation Guide
C H A P T E R 3
Forward Pit Covers
3-46
3 Secure the left and right pit covers to the pit cover spacer and dyno frame using
two 3/8-16 x 3-inch bolts each.
4 Secure the left and right pit covers to the middle pit cover using five
3/8-16 x 1/2-inch bolts each.
5 Secure the end of the middle pit cover to the end of the left and right pit covers
using two 3/8-16 x 1/2-inch bolts each.
Figure 3-33: Install the Outer Pit Covers
AD389
secure to pit cover spacer
with 3/8-16 x 3-inch bolt
left and right
pit covers
secure ends with
3/8-16 x 1/2-inch bolt
secure to middle
pit cover with
3/8-16 x 1/2-inch bolt
middle pit cover