Acronis Server Cloud Backup - User Guide - Manual (Page 98)

98 Copyright © Acronis International GmbH, 2002-2013
You will need a USB flash drive with a capacity of 256 MB or more. The drive must be formatted in
FAT16 or FAT32 file system.
To create a bootable USB flash drive, attach the drive to a USB port. Start Acronis Media Builder and
then select the drive as the destination for the rescue media creation. Then follow the Media Builder
wizard steps.
If Acronis Media Builder does not recognize your USB flash drive, you can try using the procedure
described in an Acronis Knowledge Base article at http://kb.acronis.com/content/1526.
5.1.2 Creating WinPE-based rescue media
Acronis Plug-in for WinPE can be added to WinPE distributions based on any of the following kernels:

Windows Vista family of operating systems (PE 2.0):

Windows Server 2003 SP1

Windows Server 2003 SP1 with KB926044

Windows Server 2003 SP2

Windows Server 2008 family of operating systems (PE 2.1):

Windows Server 2008

Windows Server 2003 SP1 with KB926044

Windows Server 2003 SP2

Windows Server 2008 R2 family of operating systems (PE 3.0):

Windows Server 2003 SP2

Windows Server 2008 family

Windows Server 2008 R2 family

Windows 8 family of operating systems (PE 4.0):

Windows Server 2008

Windows Server 2008 R2

Windows Server 2012
To be able to create or modify PE 2.x and 3.0 images, you must have Windows Automated
Installation Kit (AIK) installed. To create PE 4.0, you should install Windows Assessment and
Deployment Kit (ADK).
If you do not have none of these kits installed, prepare as follows:
1. Depending on your operating system, download and install one of these packs:
AIK for Windows Vista family of operating systems (PE 2.0):
http://www.microsoft.com/Downloads/details.aspx?familyid=C7D4BC6D-15F3-4284-9123-67983
0D629F2&displaylang=en
AIK for Windows Server 2008 family of operating systems (PE 2.1):
http://www.microsoft.com/downloads/details.aspx?FamilyID=94bb6e34-d890-4932-81a5-5b50c
657de08&DisplayLang=en
AIK for Windows Server 2008 R2 family of operating systems (PE 3.0):
http://www.microsoft.com/DOWNLOADS/details.aspx?familyid=696DD665-9F76-4177-A811-39C
26D3B3B34&displaylang=en
ADK for Windows 8 family of operating systems (PE 4.0):