Acronis Server Cloud Backup - User Guide - Manual (Page 83)

83 Copyright © Acronis International GmbH, 2002-2013
Advanced settings
Clicking Advanced settings allows you to specify the following additional settings for backup and
validation:

To postpone a scheduled operation until the next time the computer is not in use (a screen saver
is displayed or computer is locked), select the Run the backup only when the computer is idle
check box. If you schedule validation, the check box will change to Run the validation only when
the computer is idle.

If you want to wake up the sleeping/hibernating computer to perform the scheduled operation,
select the Wake up the sleeping/hibernating computer check box.

If you do not want your computer to go to sleep or hibernate while performing the scheduled
backup operation, select the Prevent the computer from going to sleep/hibernate check box.

If the computer is switched off when the scheduled time comes, the operation won't be
performed. You can force the missed operation to run at the next system startup. To do so,
select the Run at system startup with delay (in minutes) check box and set a time delay to start
operation after the system startup.

If you want to regularly back up data located on a removable media (for example USB flash drive)
or remote storage (for example network folder or NAS), we recommend that you select the Run
when the current source device is attached check box. This is useful because an external storage
device may be often unavailable at the scheduled moment of backup. In that case, if the check
box is selected, the missed backup operation will start when the device is connected or attached.
Having finished scheduling, click OK.
In this section
Daily execution parameters ..................................................................... 83
Monthly execution parameters ............................................................... 83
Weekly execution parameters ................................................................. 84
Upon event execution parameters .......................................................... 84
4.4.1 Daily execution parameters
You can set up the following parameters for daily operation execution:

Start time or periodicity

If you select At, set the operation's start time. Enter hours and minutes manually, or set the
desired start time using the up and down buttons. You can specify several start times by
clicking Add.

If you select Every, choose daily operation periodicity from the dropdown list (for example,
every 2 hours).
Description of the Advanced settings see in Scheduling (p. 82).
4.4.2 Monthly execution parameters
You can set up the following parameters for monthly operation execution:

Periodicity or dates