Acronis Server Cloud Backup - User Guide - Manual (Page 88)

88 Copyright © Acronis International GmbH, 2002-2013

Select the Limit transfer rate to check box and specify an optimal value and an appropriate
measurement unit (kilobits or megabits per second)
4.5.7 Notifications
You can specify an e-mail account that will be used to send you e-mail notifications.
First of all, choose which notifications you want to receive:

Send e-mail notifications about the operation state - select this check box to receive messages
about the backup process state.

Send disaster recovery plan (DRP) after creating a backup - select this check box to receive
messages containing a detailed list of steps you need to perform to recover your data from each
backup.
To specify the e-mail settings:

Enter the e-mail recipient address in the To field. You can enter several e-mail addresses in a
semicolon-delimited format.

Enter the e-mail sender address in the From field.

Enter the outgoing mail server (SMTP) in the Outgoing mail server (SMTP) field.

Set the port of the outgoing mail server. By default the port is set to 25.

If the mail server requires your credentials, select the Server requires authentication check box.

Enter the user name in the User name field.

Enter the password in the Password field.

If you would like to use encryption, select the required encryption protocol from the dropdown
list in the Encryption field.