Bio-Rad Firmware & Software Updates - Manual (Page 82)

MiniOpticon Instruction Manual
71
Quantification Tab Spreadsheet
Table 24 shows the type of data shown in the spreadsheet at the bottom right side of the
Quantification tab:
TIP: To make changes to the Content, Target, and Sample, open the Plate Editor by
clicking the Plate Setup button and selecting View/Edit Plate.
Quantification Data Tab
The Quantification Data tab shows spreadsheets that describe the quantification data
collected in each well. Select one of the four options to show the data in different formats:
• Results. Displays a spreadsheet view of the data
• Standard Curve Results. Displays a spreadsheet view of the standard curve data
• Plate. Displays a view of the data in each well as a plate map
• RFU. Choose this spreadsheet to show the RFU quantities in each well for each cycle
TIP: Right-click any spreadsheet for options, including the sort option.
Results Spreadsheet
Select a Results spreadsheet (Figure 51) to see data for each well in the plate.
Figure 51. Quantification Data tab with Results spreadsheet selected.
Baseline Thresholds... Open the Baseline Thresholds window to change baseline
or thresholds of each fluorophore (changes appear in
Amplification chart in Quantification tab).
Table 24. Quantification tab spreadsheet content
Information Description
Well Well position in the plate.
Fluor Fluorophore detected.
Target Target Name loaded in the Plate Editor wells.
Content A combination of the Sample Type (required) and Replicate #
(optional) loaded in the Plate Editor.
Sample Sample Name loaded in the Plate Editor wells.
C
q
Quantification cycle for each trace.
Table 23. Right-click menu items for spreadsheets. (continued)
Menu Option Function