Bio-Rad Firmware & Software Updates - Manual (Page 37)

Performing Runs
26
Figure 20 shows the features of the Run Details window.
Figure 20. Run Details window showing the Run Status tab.
Run Status Tab
The Run Status tab (Figure 20) shows the current status of a run in progress in the Run Details
window and provides buttons (see below) to control the lid and change the run in progress.
• Run Status pane. Displays the current progress of the protocol.
• Run Status buttons. Click one of the buttons to remotely operate the instrument or to
interrupt the current protocol
• Run Information pane. Displays run details
Run Status Tab Buttons
Click one of the buttons listed in Table 10 to operate the instrument from the software or to
change the run that is in progress.
NOTE: Changing the protocol during the run, such as adding repeats, does not change the
protocol file associated with the run. These actions are recorded in the Run Log.
Table 10. Run Status buttons and their functions
Button Function
This button is disabled for the MiniOpticon™ system.
This button is disabled for the MiniOpticon system.
Add more repeats to the current GOTO step in the protocol.
This button is only available when a GOTO step is running.