ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 68)

Sensor Installation and Connection 3-9
Quantity Description Part Number
Up to 2
(1 per
monitoring
point)
Slimline Peak Combo Sensor – upward
ultrasonic depth sensor & peak velocity sensor
w/ M3 x 6mm stainless steel, flathead screws
8K-CS4-35
(10.6m cable)
1 as
needed
IS Standard or Custom Sensor Extension Cable
for Ultrasonic Depth Sensor without Pressure
Sensor
8000-0023–xxx 2
1 as
needed
IS Standard or Custom Sensor Extension Cable
for Peak Combo, Slimline Peak Combo,
Surface Combo, and Ultrasonic Depth (with
pressure option) Sensors
8000-0025–xxx 2
as needed M6 x 55-mm SS anchor bolt (with 6mm SS nut
and washer)
1 10-mm x 76-mm anchor bolt and nut
1 Replacement dryer tube 3704–0032
1 IS PC communication direct connection cable 8000-0054
1 as
needed
GSM modem module 8000-0052
1 Antenna for the GSM module (or as an option
for the EMUX)
3800-0162 or
3800-0163
1 as
needed
Magnet (for activating diagnostic codes through
GSM modem module)
8000-0140
1 as
needed
External Modem Unit (EMU) 3800-0148
1 as
needed
External power kit (includes EMU chassis cable
and 3-meter external power cable)
3800-0181
1 as
needed
EMUX (EMU/Multiplexer) 106226E
1 as
needed
12V DC power supply 5000-0727
1 as
needed
Communication cable (from monitor to EMU or
EMUX)
106227B-xx
3
4 M3 x 6mm flat head machine screw 507820
15 Plastic push mounts
1 10mm x 55mm stainless, 1.5mm thread stud
1 10mm x1.5mm thread, stainless steel nut