ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 166)

4-48 IETG FlowHawk Manual
 Attach the antenna connector to the gold ANTENNA
connector on top of the EMUX.
Connecting antenna cable to ANTENNA port on EMUX
 EMUX in Metallic Enclosure When housing the EMUX in
a metallic enclosure, the antenna must extend outside the
enclosure to ensure adequate reception.
 Run the cable through a pre-drilled or existing hole in the
enclosure.
 Secure the antenna by removing the protective tape from
the antenna and adhering the antenna to an appropriate
surface outside the enclosure.
 Attach the antenna connector to the gold connector on top
of the EMUX.
 Seal the space between the antenna cable and the enclosure
to prevent moisture from entering the enclosure through
the hole.
When installing a customer-supplied antenna, follow the vendor’s
recommendations for properly installing the antenna to ensure
adequate reception and then attach the antenna connector to the
gold connector on top of the EMUX.