ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 179)

5-8 IETG FlowHawk Manual
 External power cable is connected to the EMU or EMUX
and the power supply
7. Connect the power supply to the AC distribution device (i.e.,
the disconnect, fuse, or breaker box).
8. Ensure the DC ON LED is illuminated and the DC LOW LED
is out.
9. Securely tighten the cable grip fittings and replace the
enclosure cover. Make sure the cover properly aligns with the
gasket and that all screws are tightened equally (i.e., snug, but
not over-tightened).