ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 254)

Configuration and Activation 6-75
Pressure 3 represents the pressure sensor in both the Surface
Combo Sensor and the Ultrasonic Depth Sensor with the
pressure option.
The Pressure Diagnostics dialog displays the current
configuration parameters stored in the LIF for the Pressure 1/3
sensor.
Pressure Diagnostics dialog showing current parameters for the Pressure
1 device
2. Click on the Read button.
The Results section displays the current depth and temperature
readings measured by the pressure depth sensor in the
corresponding combo sensor. Measured Depth is the depth of
the water over the Peak Combo Sensor or surrounding the
Surface Combo Sensor pressure sensor. Adjusted Depth is the
depth of flow in the pipe, calculated after factoring the
physical and electronic offsets into the Measured Depth.