Install solenoid valves, Assemble wing fold valve, Install wing fold valve – Great Plains NTA2007HD Predelivery Manual User Manual
Page 52: Assemble transfer valve
48
Great Plains Manufacturing, Inc.
NTA607HD
166-283Q
02/09/2011
Install Solenoid Valves
See page 95 for JIC and ORB torque.
Assemble Wing Fold Valve
Refer to Figure 79
(which depicts this area at a later stage of assembly)
182. Select one each:
810-342C NC POPPET SOLENOID VALVE
If the fittings are pre-assembled on the valve, skip to
step 186.
183. Select one each:
811-133C AD 9/16MJIC 3/4MORB
841-204C AD 9/16FJIC 3/4MORB
811-249C TE 9/16MJIC 3/4MORB 9/16MJIC
184. Install the FJIC/MORB adaptor
in the valve port
at the end opposite the coil. Add the tee
to the
FJIC end of the adaptor. Use the end MJIC port of
the tee, and not the center port.
185. Install the MJIC/MORB adaptor
at the side port
of the valve.
Install Wing Fold Valve
Refer to Figure 79
186. Remove port cap (if any) at base end port of right
fold cylinder. Install the solenoid valve
assembly
at the base port, using the MORB
port of the tee. Orient the MJIC fitting
to point
right.
Assemble Transfer Valve
Refer to Figure 80
(which depicts this area at a later stage of assembly)
187. Select one each:
810-342C NC POPPET SOLENOID VALVE
If the fittings are pre-assembled on the valve, skip to
step 191.
188. Select one each:
811-171C EL 3/4MORB 9/16MJIC
841-204C AD 9/16FJIC 3/4MORB
811-249C TE 9/16MJIC 3/4MORB 9/16MJIC
189. Install the FJIC/MORB adaptor
in the valve port
at the end opposite the coil. Add the tee
to the
FJIC end of the adaptor. Use the end MJIC port of
the tee, and not the center port.
190. Install the MJIC/MORB elbow
at the side port of
the valve, with the elbow pointing toward the coil.
Null4:
Figure 79
Wing Fold Solenoid Valve
Q0055
258
265
292
270
258
265
292
270
292
270
265
258
265
Null4:
Figure 80
Transfer Solenoid Valve
Q0056
258
270
292
264
258
264
292
270
292
270
265