Great Plains NTA2007HD Predelivery Manual - Manual (Page 34)

30 Great Plains Manufacturing, Inc. Contents Index NTA607HD
166-283Q Contents Index 02/09/2011
Implement Assembly
Clear Center Rack
Refer to Figure 43
98. Remove all loose components from the floor of the
center rack. Release and remove any held on by
straps or ties. Leave secured any parts held by
U-Bolts.
Null4:
Tip Rack Center Section Upright
Refer to Figure 44
Note: This operation usually requires two lifters, a hoist
and a forklift.
99. Position a hoist or lift to support the center frame
weldment. Secure two straps.
100. Use forklift forks to assist in balancing and lifting the
rack on to its side which positions the center row
units to rest in final assembly position.
Null4:
Null4:
Figure 43
Clear Center Section Rack
Q0003
Null4:
Figure 44
Center Section Uprighting
Q0023