Great Plains NTA2007HD Predelivery Manual - Manual (Page 35)

Great Plains Manufacturing, Inc. Contents Index Implement Assembly 31
02/09/2011 Contents Index 166-283Q
Support Center
Refer to Figure 45
101. Secure four chains/straps for hoisting once released
from rack.
Null4:
Free Center from Rack
Refer to Figure 46
Crushing Hazard:
Do not remove nuts under continuous tension. Do not remove
U-bolts in shear. As nuts are loosened, observe movement of
the center section. Adjust lift tension so that nuts turn freely
before reaching the end of the U-bolt threads. Adjust lift ten-
sion so that U-bolts move freely.
102. Remove the nuts from the four sets of U-Bolts
(only 2 visible in Figure) that secure center section
to rack at the front of the center opener tool bar.
103. Adjust lifters until U-bolts are removed without
effort. U-bolts and nuts are not reused.
Null4:
Null4:
Figure 45
Support Center Section
Q0024
Null4:
Figure 46
Free Center Section from Rack
Q0025
1
1