Great Plains NTA2007HD Predelivery Manual - Manual (Page 46)

42 Great Plains Manufacturing, Inc. Contents Index NTA607HD
166-283Q Contents Index 02/09/2011
Dismount Wings from Rack
Dismount First Wing
Refer to Figure 67 (depicting wing fasteners already removed)
156. Secure two straps on wing section and two chains
on eyelets on outside edges of rack (for hoisting
rack once first wing section is released).
157. Loosen the nuts on the four sets of U-Bolts and
two straight bolts that secure wing section to rack
mounts. Adjust lifter until fasteners are not in ten-
sion.
158. Remove nuts completely. Remove fasteners. Lift
rack free of wing. The fasteners are not reused.
Null4:
Re-Rotate Wing Rack
Refer to Figure 68
159. Carefully rotate the rack 180
°, so that the remaining
racked wing is resting on its opener discs.
160. If lifter is connected to wings, re-attach to top of
rack.
Null4: Null4:
Null4:
Figure 67
Remove a Wing Section
Q0041
1
1
2
1
2
Null4:
Figure 68
Rotate Final Racked Wing
Q0049