Great Plains NTA2007HD Predelivery Manual - Manual (Page 18)

14 Great Plains Manufacturing, Inc. Contents Index NTA607HD
166-283Q Contents Index 02/09/2011
Refer to Figure 17 (depicting hopper present)
24. Loosen meter drive chain idlers (not shown), and
the six position adjustment bolts at each hopper.
Lower the meter fully. Leave the bolts loosened. The
final meter position is set at “Align and Mate
Meters” on page 26.
Null4:
Mount Hopper Frame on Cart
Refer to Figure 19 (which depicts a frame without hoppers)
25. Lower the hopper frame assembly onto the cart
frame. The hopper frame support channels fit
outside the lugs on the cart frame.
Note: If the hopper frame does not fit, chances are it is re-
versed front-to-back.
26. Secure the hopper frame to the cart frame with the
saved bolts , flat washers , lock
washers and nuts (not shown).
Null4:
Null4:
Figure 18
Meter Positioning Bolts
Q0011
Null4:
Figure 19
Hopper Frame to Cart Frame
Q0009
7
8
7
8
187 226
225 206