Great Plains NTA2007HD Predelivery Manual - Manual (Page 12)

8 Great Plains Manufacturing, Inc. Contents Index NTA607HD
166-283Q Contents Index 02/09/2011
Tools Required
• Two mobile lifters, such as some combination of
forklifts, hoists or cranes, one of which has a capacity
of at least 2,300 kg (5,000 lbs).
Refer to Figure 5
• Drill Operator and Parts manuals:
Operator manual (166-283M) and
Parts manual (166-283P)
These must be available during assembly and check-
out. They may
a
be found inside the black polymer
Manual-Pak™ enclosure , which is shipped loose
at the base of the implement center section rack, and
mounted on the tongue weldment at step 62.
• Adjustable support stands
• Jacks
• Cartons or tote boxes for temporary storage
• 3 meter fish tape, stout line or cable snake
• Touch-up paint in Great Plains colors:
GREEN:DuPont 262,PPG 43817,Pantone 356C
BUCKSKIN:DuPont C854512,PPG 25501,Pantone
465C
Use gloss exterior enamel suitable for use on metal
surfaces.
• Basic hand tools, including:
+ ladder
+ torque wrench
+ angle grinder
+ plastic tubing cutter
• If liquid fertilizer installed:
15 liters (4 gallons) of RV antifreeze
(
α-propylene glycol)
a. These manuals are also available in PDF form on the Great Plains web site.
Null4:
Figure 5
Manual Pak
Q0002
283
283