INFICON MDC-260 Thin Film Deposition Controller - Manual (Page 25)

MDC-260 DEPOSITION CONTROLLER
GENERAL DESCRIPTION 1-7
1.4 ACCESSORIES
The table below lists the most commonly used accessories. Refer to the Price
List for more accessories and other products.
Part Number
Description
611200 DCM-250 V2.0
179220 Remote Power Handset
123200-5 SH-102 Sensor Head, cables, and
carousel of 10 each 6MHz Gold SC-101
sensor crystals
123213 BSH-150 Single Bakeable Sensor Head
with 2-3/4 innch Conflat® Flange.
150212 ASF-140 Adjustable Single Sensor with
1 inch Feedthrough Combo.
124201-4 SO-100 Oscillator with 6" and 10' BNC
Cables.
621201 VPLO-6 Vacuum Phase-Lock
Oscillator with 6" and 10' BNC Cables.
130200-2 IF-111 Instrument Feedthrough, 1" O-
Ring with 1 electrical connector and
dual 3/16" water tubes.
130204-2 IF-276 Instrumentation Feedthrough, 2
3/4" Conflat® Flange seal with 1
electrical connector and dual 3/16"
water tubes.
150902 SF-120 Combination Sensor Head,
Feedthrough, Cables, Crystals and
Oscillator.
123204-1 Internal Coax Cable 30".
123204-2 Internal Coax Cable 60".
124202-1 BNC Cable Assembly 10'.
124202-2 BNC Cable Assembly 20'
124204 BNC Cable Assembly 6".
103220 SC-101 Carousel of 10 each 6MHz gold
sensor crystals.
103221 SC-102 Carousel of 10 each 6MHz
silver sensor crystals.