INFICON MDC-260 Thin Film Deposition Controller - Manual (Page 186)

MDC-260 DEPOSITION CONTROLLER
COMPUTER INTERFACE 11-48
Code #40: Enable/Disable the Front Panel Keyboard
Description: Instructs the controller to either enable or disable the MDC-260's
front panel keys based on the value received. A value of 255 (FF hex) disables
the keys. Any other value will enable the keys.
Format/Example:
• To instruct the controller to disable the front panel keyboard, transmit:
Header Interface
Address
Inst.
Code
Length Data Byte Checksum
Dec 255 254 1 40 1 255
Hex FF FE 01 28 01 FF
Response:
• The controller will respond with the normal transmission receipt.