Apple Motion 2 Tutorials - Manual (Page 28)

28 Tutorial 1 The Motion Interface
9 In the Save As text field, type a personalized name for the project, then choose a
location to save the file.
Important: You cannot save to the installed Tutorial Projects folder. You may want to
create a folder in which you can save your tutorial work.
10 Click Save.
Note: As when working with any application, it is wise to save your projects often.
Using the Behaviors Tab
The Behaviors tab contains all controls for any behaviors that are applied to the
currently selected object. If no behaviors are applied to the currently selected object,
the Behaviors tab is empty.
To modify a behavior in the Inspector:
1 With the lower green box object still selected, click the Behaviors tab.
Click to expand the Save sheet
to navigate to a different
Using the Value Sliders
The value slider allows you to type a specific number in the value field, or to drag in
the value field to set a value. Often, you can type a higher number in the value slider
than can be achieved by dragging the normal sliders. When using the value sliders,
you can use a modifier key to make normal, fine (press Option), or course (press Shift)
value adjustments. The value sliders are contextual, which means that the “normal,”
“fine,” and “coarse” increments are specific to the parameter. For example, a “normal”
increment for Opacity is 1, a “fine” increment is .1, and a “coarse” increment is 10.