Konica Minolta bizhub 222 - Manual (Page 89)

3 Reception
3-6 362/350/282/250/222/200
Reception
Chapter 3
When unable to receive
If the fax cannot be received or printed, an error message appears.
Refer to “Error messages” on page 4-6, and then perform the indicated op-
eration.
2
Note
If the received document cannot be printed, for example, if “Replenish
paper.” or “Misfeed detected.” appears, it is saved in the machine’s
memory until it can be printed (temporary memory reception). Check the
error message, and then correct the problem, for example, clear the mis-
fed paper. When the problem is corrected, the received document saved
in the memory is printed.
If the memory is full, the fax cannot be temporarily saved. Check that pa-
per is loaded into a paper tray.
If the connected telephone continues to ring, “Reception Mode” may be
set to “Manual”. In order to automatically receive faxes, “Auto” must be
selected. For details, refer to “Specifying the reception mode and the
number of rings (RX Functions)” on page 10-44.