Konica Minolta bizhub 222 - Manual (Page 267)

10 Utility mode
10-84 362/350/282/250/222/200
Utility mode
Chapter 10
Specifying settings for fax reception functions (mode 030)
Specify whether or not rotation or 2in1 printing is used with received faxes.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
(*) If rotation printing is specified, you can specify whether or not crosswise
sorting is performed if a remote copy fax is received.
Bit 7 6 5 4 3 2 1 0
Setting 1 0 1 1 0 0 0 1 (HEX: B1)
Bit Description Setting Description Page Refer-
ence
7 ----------------------- 1 *Do not change this bit
when specifying settings
for this function. ----------
6, 5 Specifies whether or
not rotation printing
is used with re-
ceived faxes. (*) 00 Does not rotate p. 3-5
01 Rotates (Does not sort
crosswise if a remote
copy fax is received)
10 Rotates (Sorts crosswise
if a remote copy fax is re-
ceived)
11 *Do not specify this set-
ting for this function.
4 Specifies whether or
not 2in1 printing is
used with received
faxes. (*) 0 2in1 printing is not used
with received faxes p. 3-5
1 2in1 printing is used with
received faxes
3, 2, 1, 0 ----------------------- 0001 *Do not change these bits
when specifying settings
for this function. ----------