Konica Minolta bizhub 222 - Manual (Page 170)

Registering/specifying settings 9
362/350/282/250/222/200 9-23
Regist
er
ing/
spe
c
if
ying set
ti
ngs
Chapter 9
6
Touch [Next].
7
Touch the [Transmission
Setting].
8
Specify the functions to
be programmed. After all
of the desired functions
have been specified,
touch [Enter].
– If desired, touch
[Quality] or [Menu 1],
and then specify the
desired settings. For
details on the set-
tings available on the
Quality screen, refer
to “Specifying the transmission settings” on page 2-9. For details
on the settings available on the Menu 1 screen, refer to “Useful
transmission functions” on page 6-2.
9
Check the information to
be registered, and then
touch [Enter].
To change a setting,
touch the button for the
setting to be changed,
and then specify the new
setting.
10
Touch [Enter] in each screen until the standby screen (initial screen) ap-
pears.