9 programming a name (tsi registration), To register a transmission source name, Programming a name (tsi registration) -25 – Konica Minolta bizhub 222 User Manual
Page 208: To register a transmission source name -25, P. 10-25
Utility mode
10
362/350/282/250/222/200
10-25
Utility mode
Chapter 10
10.9
Programming a name (TSI Registration)
Text entered as the transmission source can be printed at the edge of faxes.
Register the name of transmission source.
-
A maximum of eight transmission source names can be registered. Since
multiple transmission source names can be registered, a different trans-
mission source name can be used for different recipients or for different
accounts.
-
A maximum of 40 characters can be entered for the transmission source
name.
2
Note
For details on sending faxes with different transmission source names,
refer to “Sending faxes printed with transmission information” on
page 6-6.
To register a transmission source name
1
After entering Administrator mode, touch [Admin. 1].
2
Touch [Initial Setting].
3
Touch [TSI Registration].