Konica Minolta bizhub 222 - Manual (Page 329)

11 Specifying settings using PageScope Web Connection
11-46 362/350/282/250/222/200
Spe
c
if
ying
s
e
tt
ing
s
us
ing
Pa
ge
Sc
op
e
We
b C
o
n
n
e
c
tion
Ch
ap
te
r 11
11.14 TCP/IP (Administrator mode)
Specifies the required settings for using this machine over a network.
In TCP/IP, the following settings can be specified.
2
Note
For the IP address and DNS server address, the IP address that begins
with digits “0.”, “127.”, or “numbers 224 or more” cannot be specified.
Item Description
TCP/IP Config-
uration[*] Select whether to enable or disable TCP/IP.
DHCP
Configuration
[*] Specify the DHCP server to enable (acquires the IP address automatically) or
disable (specifies a fixed IP address).
IP Address [*] Specify the IP address of this machine. Specify when “Disable” is selected in
DHCP Configuration.
Subnet Mask [*] Enter the subnet mask of the network to be connected. Specify when
“Disable” is selected in DHCP Configuration.
Gateway
Address [*] Enter the default gateway of the network to be connected. Specify when
“Disable” is selected in DHCP Configuration.
RAW Port[*] Select whether or not a port number is used with RAW printing.
RAW Port
Number Specify the RAW port number. Enter the port number within the range of 1 to
65535.
Self-Domain
Name [*] Specify the domain name of this machine.
Port Number[*] Type in a port number between 1 and 65535 for this machine’s domain.
DNS
Configuration Specify “Yes” or “No” for the DNS (Domain Name System).
When using a DNS server within a network, specify “Yes”. When not using the
a DNS server within a network, specify “No”.
Host Name Specify the host name of this machine.
For the contents to be entered, ask the network administrator. Specify when
“Yes” is selected in DNS Configuration.
Domain Name Specify the domain name of the DNS server.
For the contents to be entered, ask the network administrator. Specify when
“Yes” is selected in DNS Configuration.
DNS Server
Address 1 to 3 Specify the IP addresses of the DNS server.
For the contents to be entered, ask the network administrator. Specify when
“Yes” is selected in DNS Configuration.
DNS Query
Timeout Select the time when the attempt to access the DNS server is stopped. Select
20, 40, 80, 160, 320, or 640 seconds.
SLP Setting[*] Select whether to enable or disable SLP (Service Location Protocol).
LPD Setting[*] Select whether to enable or disable LPD (Line Printer Daemon).