Konica Minolta bizhub 222 - Manual (Page 36)

Before use 1
362/350/282/250/222/200 1-7
Be
fo
re
u
s
e
Chapter 1
1.4 Initial settings
Required settings
After installation, settings must be specified for the following in order to use
the Fax functions. Be sure to specify these settings correctly, otherwise fax
transmissions cannot be performed.
-
Date & Time Setting: Specify the date and time.
- Self-telephone # Information: Specify the fax number for the machine and
the dialing method that is used.
- TSI Registration: Program the name of the transmission source.
- Reception Mode: Select whether faxes will be received automatically or
manually.
Date & Time Setting
-
Date & Time Setting
Specify the current date and time.
- Time Zone
Specify the time zone.
!
Detail
For details on specifying the date and time, refer to the User’s Guide
[Copy Operations].
Self-telephone # Information
-
Self-Telephone #
Program the machine’s telephone number (local telephone number). The
local telephone number is used when notifying the recipient of the ma-
chine’s telephone number.
- PBX Connection Mode
The fax may not transmitted correctly if a PBX (private branch exchange)
is used. Specify the correct setting when a general local telephone line is
used with a PBX.
- Dialing Method
Select the dialing method according to the telephone line being used.
The dialing method can be a push-button line (PB) or a dial phone line (DP
10 pps or DP 20 pps). If the machine is not set for the dialing method
used, faxes cannot be transmitted.
!
Detail
For details, refer to “Programming the telephone number (“Self-tele-
phone # Information” parameter)” on page 10-21.