Konica Minolta bizhub 222 User Manual
Page 176
Registering/specifying settings
9
362/350/282/250/222/200
9-29
Regist
er
ing/
spe
c
if
ying set
ti
ngs
Chapter 9
8
Touch [F-CODE].
9
Type in the F-code, and
then touch [Enter].
–
Register the F-code
for using the bulletin
board.
–
A maximum of 20
characters (0 through
9, # and *) can be en-
tered.
–
Do not specify the
same F-code for a
different bulletin
board or for a confidential box.
10
If desired, touch [F-
CODE Password], and
then type in password.
–
Register a password
for each bulletin
board.
–
A maximum of 20
characters (0 through
9, # and *) can be en-
tered. The entered
password appears
as asterisks (*).
?
Although a password was specified, why can’t viewing be limited?
% The password is entered when limiting viewing of the bulletin board.
To specify the viewing limitations, touch [Remote Input Check] or
[Remote Output Check].
11
Touch [Remote Input Check].