Konica Minolta bizhub 222 - Manual (Page 193)

10 Utility mode
10-10 362/350/282/250/222/200
Utility mode
Chapter 10
4
Select a tab, and then
select a parameter to be
set.
5
Specify the desired settings, and then touch [Enter].
– To cancel changes to the settings, touch [Cancel].
“Output Tray Settings” is available on tab 5/6, and “Default Screen” is
available on tab 6/6.
2
Note
To exit the User’s Choice screens, touch [Enter] in each screen until the
standby screen appears.
Output Tray Settings
Tab Parameter Description Default Setting
5/6
O
u
tpu
t Tray Se
ttin
g
s
Faxes/Print
s
Port 1 Select the exit tray for data
received at the fax port. 1 (output tray 1)
Port 2 Select the exit tray for data
received at port 2 when
the multi port is installed. 1 (output tray 1)
Network Select the exit tray for data
received from the network. 1 (output tray 1)
Copier
/P
ri
nter
Printer Specify the exit tray for
computer printouts. 1 (output tray 1)
Copies Specify the exit tray for
copies. 2 (output tray 2)
1 (output tray 1)