Konica Minolta bizhub 222 - Manual (Page 313)

11 Specifying settings using PageScope Web Connection
11-30 362/350/282/250/222/200
Spe
c
if
ying
s
e
tt
ing
s
us
ing
Pa
ge
Sc
op
e
We
b C
o
n
n
e
c
tion
Ch
ap
te
r 11
11.9 TX Settings (Administrator mode)
Transmission settings
The default settings for transmission can be specified.
The following settings can be specified.
Item Description
Quality/Mode
Default Quality Specify the quality default value that is reset after operation is complete.
Default Density Specify the density default value that is reset after operation is complete.
Com. Mode Specify the communication mode default value that is reset after operation is
complete.
FAX Menu
TX Select the transmission method.
Memory TX: Sends the data after the entire document is scanned.
Quick Scan TX: Sends the document one page at a time.
TSI Select the transmission source name.
Off: Does not attach the transmission source name.
Inside Body Text: Prints the transmission source name on the original
document.
Outside Body Text: Does not print the transmission source name on the
original document.
TSI Selection Select the name of the transmission source.
Rotation TX Specify whether to reset the rotation transmission after the operation is
complete.
2-Sided TX Specify whether to reset the duplex transmission after the operation is
complete.
Original
Bind
Direction Select the position of the document binding margin for double - sided trans-
missions.