Konica Minolta bizhub 222 - Manual (Page 312)

Specifying settings using PageScope Web Connection 11
362/350/282/250/222/200 11-29
Spe
c
if
ying
s
e
tt
ing
s
us
ing
Pa
ge
Sc
op
e
We
b C
o
n
n
e
c
tion
Ch
ap
te
r 11
11.8 Transmission source registration
Select the information, such as the name, fax number, or address, that is
printed at the edge of the page when a fax is sent.
Registers this transmission source name. Since multiple transmission sourc-
es can be registered, the names for each destination and track can used sep-
arately. The registered transmission source name can be changed in the
same procedure as that of registration.
To register transmission sources
1
In the Administrator mode, click the [Fax/Scan] tab.
– For the procedure to log on to Administrator mode, refer to “Log-
ging on to Administrator mode” on page 11-8.
2
Click [TSI Registration].
3
Enter the transmission source name, and then click [Apply].
– Up to 8 transmission source names can be registered.
– Up to 40 characters can be entered.
4
Click [OK].