Konica Minolta bizhub 222 Instruction Manuals and User Guides
We have 11 Instruction Manuals and User Guides for bizhub 222 Konica Minolta
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 204 |
| Size: | 8.66 MB |
Show table of contents
Document Outline
- Contents
- Introduction
- 1 Overview of the Box functions
- 2 Saving documents
- 2.1 General information
- 2.2 Saving while copying
- 2.3 Scanning and saving the data (Scan to HDD)
- Available functions/parameters
- Saving data by touching a one-touch dial button
- To save scan data using a one-touch button
- Specifying the scanning quality
- To specify the scanning quality
- Specifying the scanning density
- To specify the scanning density
- Specifying the document scanning size
- Printing the result report
- To print the transmission report
- Specifying the 2in1 setting
- Specifying the 2-Sided TX setting
- Specifying the Priority TX setting
- Specifying the Timer TX Setting
- Specifying the Stamp setting
- Specifying the file name
- Specifying the e-mail notification recipient
- Viewing the transmission report
- 2.4 Downloading saved documents to the computer
- 2.5 Saving print data
- 3 Printing documents
- 4 Routing documents
- 5 Control Panel Settings
- 5.1 Available functions
- 5.2 Registering one-touch recipients from the control panel
- 5.3 Deleting confidential documents
- 5.4 Managing data saved on the hard disk
- 5.5 Specifying software switch settings (machine functions)
- Software SW settings
- To change a software switch setting
- Specifying settings for address input and broadcast transmissions (mode 018)
- Specifying settings for the image in the failed transmission report (mode 023)
- Specifying the length of time that confidential documents are saved (mode 036)
- Verifying the integrity of files saved on the hard disk during startup (mode 430)
- Specifying whether to enable access locks, the method for deleting image data, the selection method for confidential documents, and whether to enable the password rules (mode 469)
- Specifying whether or not the use of TCPSocket is prohibited (mode 477)
- Specifying the deleting method for [Del.] in input screens (mode 478)
- Specifying settings for limiting user authentication to only Scan functions (mode 479)
- 6 Specifying settings using PageScope Web Connection
- 6.1 Using PageScope Web Connection
- Performing operations from PageScope Web Connection
- System requirements
- Accessing PageScope Web Connection
- When performing user authentication
- If account track settings have been applied
- Structure of pages
- Logging on to Administrator mode
- Web browser cache
- With Internet Explorer
- With Netscape
- Searching for a user box by its box number
- Searching for a user box from the indexes
- 6.2 Registering one-touch recipients
- 6.3 Performing Box operations from User mode
- 6.4 Performing Box operations from Administrator mode
- 6.1 Using PageScope Web Connection
- 7 Appendix
| Recognized languages: | English |
|---|---|
| Pages: | 3 |
| Size: | 1.40 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 90 |
| Size: | 4.31 MB |
Show table of contents
Document Outline
- Contents
- 1 Security
- 2 Administrator Operations
- 3 User Operations
| Recognized languages: | English |
|---|---|
| Pages: | 76 |
| Size: | 2.98 MB |
Show table of contents
Document Outline
- Introduction
- Terminology Note
- System requirements
- Table of contents
- Preparation
- Operation Manual
- 1 Configuring Network FAX
- 2 Sending your first fax
- 3 Sending a fax
- 4 Using the Address Book
- 5 Renaming and deleting documents
- 6 Viewing Documents
- Appendix
- –> Operation manual menu
| Recognized languages: | English |
|---|---|
| Pages: | 30 |
| Size: | 1.44 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 94 |
| Size: | 2.35 MB |
Show table of contents
Document Outline
- Introduction
- 1 Overview
- 2 Installing the fax driver
- 3 Setting up the fax driver (Windows)
- 4 Troubleshooting
- 5 Appendix
- 6 Index
| Recognized languages: | English |
|---|---|
| Pages: | 424 |
| Size: | 12.25 MB |
Show table of contents
Document Outline
- Introduction
- Energy Star®
- Trademarks and registered trademarks
- Contents
- Available features
- Automatically selecting the paper
- Adjusting copies to the size of the paper
- Specifying separate horizontal and vertical zoom ratios
- Scanning the document in separate batches
- Sorting copies
- Stapling copies
- Punching holes in copies
- Center binding
- Copying multiple document pages onto a single page
- Copying a document containing pages of various sizes
- Adjusting copies according to the image quality of the original
- Adding a cover page
- Adding insertions, such as colored paper, within copies
- Inserting paper (interleaves) between copies of overhead projector transparencies
- Adding a binding margin to copies
- Erasing sections of copies
- Repeating copy images
- Separately copying a page spread
- Copying with a layout of a book or magazine
- Printing distribution numbers and stamps
- Printing copies overlapping a different image
- Copying with black and white reversed
- Checking copy jobs
- Programming copy settings
- Checking the copy settings
- Enlarging the size of text in touch panel screens
- Interrupting a copy job
- Printing a proof copy
- Saving copy documents
- Explanation of manual conventions
- User’s Guides
- Descriptions and symbols for documents and paper
- Legal restrictions on copying
- 1 Installation and operation precautions
- 1.1 Safety information
- 1.2 USER INSTRUCTIONS
- 1.3 Laser safety
- Internal laser radiation
- CDRH regulation
- For European users
- For Denmark users
- For Finland, Sweden users
- For Norway users
- Laser safety label
- Ozone release
- Acoustic noise (For European users only)
- Notification for US only
- Recycling batteries (For Taiwan Users Only)
- For EU member states only
- For EU member states only
- 1.4 Caution notations and labels
- 1.5 Space requirements
- 1.6 Operation precautions
- 2 Before making copies
- 2.1 Part names and their functions
- Options
- Outside of machine
- Inside/back of main unit
- Reverse Automatic Document Feeder DF-620
- Paper Feed Cabinet PC-108/PC-206/PC-407
- Saddle Stitcher SD-507/Mailbin Kit MT-502
- Finisher FS-530/Output Tray OT-602/Punch Unit PU-501
- Control panel
- Basic settings screen (Basics screen)
- Icons that appear in the screen
- Enlarging the touch panel screens
- 2.2 Adjusting the angle of the control panel
- 2.3 Turning on the main power and the auxiliary power
- To turn on the machine
- To scan during warm-up
- To turn off the machine
- Automatically returning to the default settings (Automatic panel reset)
- Automatically returning to the screen given priority
- Automatically conserving energy (Low Power mode)
- Automatically conserving energy (Sleep mode)
- Darkening the touch panel (LCD Back-Light Off)
- Controlling machine use with user authentication (machine authentication)
- Controlling machine use with user authentication (external server authentication)
- Limiting user access with account track
- Controlling machine use with user authentication (external server authentication) and account track
- Controlling machine use with user authentication (machine authentication) and account track
- Controlling machine use with user authentication (machine authentication) and account track synchronized
- 2.4 Loading paper into the 1st or 2nd tray
- 2.5 Loading paper into the LCT
- 2.6 Loading paper into the bypass tray
- 2.1 Part names and their functions
- 3 Basic copy operation
- 3.1 General copy operation
- 3.2 Operations that cannot be combined
- 3.3 Feeding the document
- 3.4 Specifying document settings
- Copying documents of mixed sizes (“Mixed Original” setting)
- To copy documents with the “Mixed Original” setting
- Selecting the document orientation (Original Direction settings)
- To select an Original Direction setting
- Selecting the position of the binding margin (Margin settings)
- To select a Margin setting
- 3.5 Selecting a Paper setting
- 3.6 Specifying a Zoom setting
- Automatically selecting the zoom ratio (“Auto Zoom” setting)
- Specifying the same zoom ratio as the document (“×1.0” setting)
- Slightly reducing the copy (“Minimal” setting)
- Finely adjusting the zoom ratio
- Selecting a preset zoom ratio (Enlarge and Reduce settings)
- Typing in the zoom ratio
- Specifying separate horizontal and vertical zoom ratios (Individual Zoom settings)
- Selecting a stored zoom ratio
- Storing the desired zoom ratio
- 3.7 Selecting single-/double-sided settings for originals and copies
- 3.8 Specifying document quality/density settings
- 3.9 Selecting a Combine Originals setting
- 3.10 Selecting finishing for copies
- 3.11 Scanning the next document during printing (reserving a copy job)
- 3.12 Stopping/deleting a job
- 4 Additional copy operations
- 5 Troubleshooting
- 5.1 When the message “Malfunction detected.” appears (Call technical representative)
- 5.2 When the message “Misfeed detected.” appears
- Location of paper misfeed
- Paper misfeed indications
- To clear a paper misfeed in the ADF
- To clear a paper misfeed in the fusing unit
- To clear a paper misfeed in the automatic duplex unit
- To clear a paper misfeed in the bypass tray
- To clear a paper misfeed in the 1st or 2nd tray
- To clear a paper misfeed in the 3rd or 4th tray
- To clear a paper misfeed in the LCT
- To clear a paper misfeed in the finisher
- To clear a paper misfeed in the mailbin kit
- To clear a paper misfeed in the saddle stitcher
- 5.3 When the message “Replenish paper.” appears
- 5.4 When the message “... Not enough remaining memory.” appears
- 5.5 When the message “Please exchange toner.” appears
- 5.6 When the message “Stapler empty.” appears
- 5.7 Basic troubleshooting
- 5.8 Main messages and their remedies
- 6 Specifications
- 7 Copy paper/original documents
- 8 Application functions
- 8.1 Adding cover pages (“Cover Mode” function)
- 8.2 Inserting cover pages (“Insert Sheet” function)
- 8.3 Inserting paper between overhead projector transparencies (“OHP Interleave” function)
- 8.4 Adding filing margins to copies (“Page Margin” function)
- 8.5 Erasing unwanted areas of copies (“Edge/Frame Erase” function)
- 8.6 Tiling copy images (“Image Repeat” function)
- 8.7 Producing separate copies of each page in a page spread (“Book Copy” function)
- 8.8 Creating booklet copies (“Booklet” function)
- 8.9 Printing additional information on copies (Image Settings functions)
- 8.10 Printing copies overlapping a different image (“Image Overlay” function)
- 8.11 Copying with light and dark coloring inversed (“B/W Reverse” setting)
- 8.12 Separate scan
- 9 Replacing toner bottles and staples and emptying punch waste containers
- 10 Care of the machine
- 11 Utility mode
- 11.1 Overview of Utility mode parameters
- 11.2 Specifying User’s Choice settings
- To specify User’s Choice settings
- Mixed Original Detection
- Language Selection
- Measurement Unit Setting
- Machine Authentication PW Change
- Default Setting Simplex/Duplex
- Auto Paper/Auto Zoom
- Priority Tray
- Special Paper Setting
- Zoom Ratio for Combine/Booklets
- Low Power Mode
- Sleep Mode
- LCD Back-Light OFF
- Auto Reset
- Auto Reset when Account is changed
- 4in1 Copy Order
- Default Quality/Density Modes
- Default Copy Output Levels
- Print Density
- Default Finishing Mode
- Sort/Non-Sort Auto Change
- Output Tray Settings
- Auto Paper Select for Small Orig.
- Crease/Center Staple
- Default Screen
- Default Device
- Image Quality (ADF)
- 11.3 Specifying User Management settings
- 11.4 Displaying the Administrator Management screen
- 11.5 Specifying Initial Settings
- 11.6 Specifying Administrator settings
- 11.7 Specifying the account/authentication settings (User Authentication ON/OFF parameters)
- 11.8 Specifying account data settings
- 11.9 Specifying user authentication settings
- 11.10 Specifying software switch settings (machine functions)
- To specify a software switch setting
- Specifying permissions for copy functions (mode 307)
- Specifying the enlarged display method (mode 311)
- Specifying that the “Auto Paper Select” setting and the “Auto Zoom” setting can be selected at the same time (mode 403)
- Specifying the measurement units (mode 426)
- Specifying settings when copying is finished using the ADF (mode 429)
- Specifying the pressing of the [Access] key when logging off (mode 438)
- Specifying use of registered user authentication information to log on to the LDAP server (mode 466)
- Specifying whether to enable access locks and password rules, and specifying the method for deleting image data (mode 469)
- Specifying the setting for displaying a list of users in the User Authentication screen (mode 471)
- Specifying the deleting method for [Del.] in input screens (mode 478)
- Specifying settings for limiting user authentication to only Scan functions (mode 479)
- 11.11 Specifying security settings (Security Setting parameters)
- 11.12 Managing the memory (Memory Management parameters)
- 11.13 Password rules
- 12 Appendix
| Recognized languages: | English |
|---|---|
| Pages: | 372 |
| Size: | 12.23 MB |
Show table of contents
Document Outline
- Welcome
- 1 Overview
- 2 Installing the printer driver
- 2.1 Printer drivers and supported operating systems
- 2.2 When used with Windows
- Automatic installation using the installer
- To install the printer driver
- Installing the printer driver using Plug and Play
- For Windows 2000
- For Windows XP/Server 2003
- For Windows Vista/Server 2008
- Installing the printer driver using the Add Printer Wizard
- For Windows XP/Server 2003
- For Windows Vista/Server 2008
- For Windows 2000/NT 4.0
- Uninstalling the printer driver
- 2.3 When used with Macintosh
- 3 Setting up network printing
- 3.1 Overview of network functions
- 3.2 Setting the IP address for this machine
- 3.3 Accessing PageScope Web Connection
- 3.4 Windows printing
- 3.5 LPR printing
- 3.6 Port 9100 Printing (Windows 2000/XP/Vista/Server 2003/Server 2008)
- 3.7 IPP printing (Windows 2000/XP/Vista/Server 2003/ Server 2008)
- 3.8 Printing with NetWare
- For Remote Printer mode with NetWare 4.x bindery emulation
- For Print Server mode with NetWare 4.x bindery emulation
- For NetWare 4.x Remote Printer mode (NDS)
- For NetWare 4.x/5.x/6 Print Server mode (NDS)
- For NetWare 5.x/6 Novell Distributed Print Service (NDPS)
- Setting up a client (Windows) settings when using the NetWare server
- 3.9 Printing with Macintosh
- 4 Various printing methods
- 4.1 Printing operations
- 4.2 Setting the printing functions
- Function list
- Function overview
- Orientation
- Original Size and Output Size
- Zoom (enlargement and reduction)
- Input tray (paper source)
- Paper Type
- Print type (duplex printing/booklet printing)
- Printing multiple pages on one page
- Stapling and hole punching
- Output Method (job management)
- Sorting (Collate) and classifying (Offset)
- Skip Blank Pages (saving paper)
- Front Cover Page, Back Cover Page, and Transparency Interleave
- Per Page Setting
- Overlay
- Watermark
- Use Printer Fonts (substitute fonts)
- User Authentication
- Account Track
- For Windows
- For Macintosh
- 5 Setting up the PCL driver
- 5.1 Settings
- 5.2 Specifying the Setup tab settings
- Printing to suit the paper size
- Saving a custom size
- Selecting the paper source
- Setting the paper source of the paper type
- Specifying duplex/booklet printing
- Printing multiple pages on one page (N in 1)
- Setting the file margin
- Stapling
- Hole punching
- Center Staple and Fold
- Selecting the output method
- Specifying user authentication settings
- Specifying account track settings
- 5.3 Specifying the Per Page Setting tab settings
- 5.4 Specifying the Overlay tab settings
- 5.5 Specifying the Watermark tab settings
- 5.6 Specifying the Quality tab settings
- 5.7 Specifying the Font tab settings
- 5.8 Specifying the Option tab settings
- 5.9 Saving the driver settings
- 6 Setting up the PostScript driver (Windows)
- 7 Setting up the VXL/VPS driver (Windows Vista/Server 2008)
- 7.1 Settings
- 7.2 Specifying the Basic tab settings
- 7.3 Specifying the Layout tab settings
- 7.4 Specifying the Finish tab settings
- 7.5 Specifying the Cover Mode tab settings
- 7.6 Specifying the Stamp/Composition tab settings
- 7.7 Specifying the Quality tab settings
- 7.8 Specifying the Other tab settings
- 7.9 Specifying the Configure tab settings
- 7.10 Specifying the Settings tab settings
- 7.11 Saving the driver settings
- 8 Setting up the PPD driver (Mac OS 9.2)
- 9 Setting up the PPD driver (Mac OS X)
- 10 Various settings
- 10.1 Printer settings on the control panel
- Printer settings
- To display the Printer Setting screen
- MFP Set
- Proof-Print Hold Time
- Overwrite A4<- ->Letter
- Document Hold Time
- PostScript Error Report
- Default Set
- Basic Setting - Tray
- Basic Setting - Paper Size
- Basic Setting - Original Direction
- Basic Setting - Print Method
- Basic Setting - Sets
- Font - Font #
- Font list
- Font - Symbol Set
- Symbol set list
- Font - Number Lines
- Font - Font Size
- Font - CR/LF Mapping
- PDL Set
- Test Print
- 10.2 Administrator settings
- 10.3 Specifying the status settings for the functions (Software SW)
- 10.4 Using PageScope Web Connection
- Operating environment
- Accessing PageScope Web Connection
- When performing user authentication
- Page structure
- Logging on to Administrator mode
- Web Browser Cache
- For Internet Explorer
- For Netscape Navigator
- User mode
- System tab
- System tab - Summary
- System tab - Detail - Paper Tray
- System tab - Detail - Output Tray
- System tab - Detail - HDD
- System tab - Detail - Interface Information
- System tab - Detail - Consumables
- System tab - Counter
- System tab - Online Assistance
- Job tab
- Job tab - Job List
- Print tab
- Print tab - Default Settings
- Print tab - Test Print
- Administrator mode
- Basic operation
- System tab
- System tab - User’s Choice - User’s Choice 1
- System tab - User’s Choice - User’s Choice 2
- System tab - User’s Choice - User’s Choice 3
- System tab - User’s Choice - User’s Choice 4
- System tab - User’s Choice - User’s Choice 5
- System tab - User’s Choice - User’s Choice 6
- System tab - Administrator Management - Date & Time Setting
- System tab - Administrator Management - Administrator Settings
- System tab - Administrator Management - Account Data
- System tab - Administrator Management - User Authentication
- System tab - Online Assistance
- Print tab
- Print tab - Local I/F
- Print tab - Default Settings - General Settings
- Print tab - Default Settings - PCL Settings
- Print tab - Default Settings - PS Settings
- Print tab - IPP Configuration
- Scan tab
- Network tab
- Network tab - Common Setting - TCP/IP
- Network tab - Common Setting - IP Filtering
- Network tab - Common Setting - IPP
- Network tab - Common Setting - NetWare
- Network tab - Common Setting - NetWare Status
- Network tab - Common Setting - Windows
- Network tab - Common Setting - AppleTalk
- Network tab - User Authentication
- 10.5 Print job management
- Specifying job operations
- Specifying settings (for Windows)
- Specifying settings (for Mac OS X)
- Job storage
- Recalling jobs (Proof Print)
- Recalling jobs (Secure Print)
- Printing with this machine when authentication and account track settings have been applied
- Specifying settings (for Windows)
- Specifying settings (for Mac OS X)
- 10.1 Printer settings on the control panel
- 11 Troubleshooting
- 12 Appendix
| Recognized languages: | English |
|---|---|
| Pages: | 94 |
| Size: | 4.77 MB |
Show table of contents
Document Outline
- Welcome
- 1 Overview
- 2 Installing the printer driver
- 3 Setting up network printing
- 4 Various printing methods
- 4.1 Printing operations
- 4.2 Setting the printing functions
- Function list
- Function overview
- Orientation
- Original Size and Output Size
- Zoom (enlargement and reduction)
- Input tray (paper source)
- Paper Type
- Print type (duplex printing/booklet printing)
- Printing multiple pages on one page
- Stapling and hole punching
- Output Method (job management)
- Sorting (Collate) and classifying (Offset)
- Skip Blank Pages (saving paper)
- Front Cover Page, Back Cover Page, and Transparency Interleave
- Per Page Setting
- Overlay
- Watermark
- Use Printer Fonts (substitute fonts)
- User Authentication
- Account Track
- For Windows
- For Macintosh
- 5 Various settings
- 6 Troubleshooting
- 7 Appendix
| Recognized languages: | English |
|---|---|
| Pages: | 288 |
| Size: | 4.92 MB |
Show table of contents
Document Outline
- Contents
- Introduction
- 1 Features
- 2 IP address faxing
- 3 Scan to PC operations
- 4 IP Scanner
- 4.1 Before using IP Scanner
- 4.2 Installing/uninstalling utilities
- 4.3 IP Scanner operations
- Main window
- Available commands
- Scanner Settings dialog box
- Sort Settings dialog box (Scanner tab)
- Sort Settings dialog box (RX Document tab)
- Sort Settings dialog box (TX Document tab)
- Divided Settings dialog box
- Receive Notify Settings dialog box
- ViewWindow
- Printer Setting dialog box
- Print Property dialog box
- 4.4 ImageReceiver operations
- 4.5 Registering scan buttons and scan operations
- General operation
- Starting IP Scanner
- Registering a scan button
- Scanning a document using the registered settings
- Viewing the scanned image
- Specifying automatic printing with IP Scanner
- Automatically printing with IP Scanner
- Specifying automatic printing with ImageReceiver
- Automatically printing using a one-touch dial button
- Exiting IP Scanner
- 4.6 Other operations
- 5 IP Relay operations
- 6 Specifying settings using PageScope Web Connection
- 7 Specifying management settings
- 7.1 Available parameters
- 7.2 IP Relay Settings
- 7.3 Specifying software switch settings (machine functions)
- Software SW settings
- To specify a software switch setting
- Specifying settings to limit dialing and broadcast transmissions (mode 018)
- Specifying settings for the image in the results report (Mode 023)
- Specifying settings for checked receiver transmissions (mode 200)
- Specifying transmission source information for IP address faxing (mode 351)
- Specifying whether transmission source information is added when performing an IP relay operation or forwarding received documents (mode 352)
- Specifying the default address input screen (mode 366)
- Specifying settings for the information indicated in the report for IP relay transmissions (mode 368)
- Specifies the coding method for IP relay transmissions (mode 381)
- Specifying settings concerning the transmission results for IP relay transmissions (mode 382)
- Specifying settings to limit the use of communication modes-1 (mode 475)
- Specifying settings to limit the use of communication modes-2 (mode 476)
- Specifying settings to limit the use of communication modes-3/Specifying restrictions for registering fax addresses and printing reports and specifying how one-touch dial recipients are displayed (mode 477)
- Specifying the deleting method for [Del.] in input screens (mode 478)
- Specifying settings for limiting user authentication to only Scan functions (mode 479)
- 8 Troubleshooting
- 9 Appendix
| Recognized languages: | English |
|---|---|
| Pages: | 366 |
| Size: | 9.82 MB |
Show table of contents
Document Outline
- Introduction
- Special Notice to User
- Contents
- Getting Started
- Available features
- Printing transmission information
- Sending a fax at a specified time
- Sending one scanned page at a time (Quick Scan TX)
- Overseas faxing
- Sending a fax printed with the recipient’s name
- Sending a fax with the document scanning area specified
- Specifying the binding position of double-sided documents
- Sending a fax with a command sent from the recipient
- Storing a document for polling
- Using a confidential box
- Sending a fax protected with a password
- Advanced scanning features
- User’s Guides
- Explanation of manual conventions
- Descriptions and symbols of documents and paper
- 1 Before use
- 2 Transmission
- 2.1 General fax operation
- 2.2 Feeding the document
- 2.3 Faxing a multi-page document from the original glass
- 2.4 Specifying the transmission settings
- 2.5 Specifying a recipient
- 2.6 Check the recipient before sending
- 2.7 Faxing after using the telephone (manual faxing)
- 2.8 Combining one-touch dialing and direct dialing (chain dialing)
- 2.9 Operations while scanning
- 2.10 When unable to send
- 2.11 Stopping the transmission
- 2.12 Checking transmission results (Job List)
- 3 Reception
- 4 Troubleshooting
- 5 Specifications
- 6 Useful transmission functions
- 6.1 FAX Menu
- 6.2 Sending faxes printed with transmission information
- 6.3 Checking a report for the transmission result (“TX Report” function)
- 6.4 Sending two document pages as one (“2in1” function)
- 6.5 Sending double-sided documents (“2-Sided TX” function)
- 6.6 Sending an Letter-size document with a landscape orientation (“Rotation TX” function)
- 6.7 Giving a fax priority (“Priority TX” function)
- 6.8 To send a fax at a specified time (“Timer TX Setting” function)
- 6.9 Stamping faxed documents (“Stamp” function)
- 6.10 Sending a document one page at a time (“Quick Scan TX” function)
- 6.11 Sending a fax with a password applied (“Password TX” function)
- 6.12 Specifying the number of fax copies (“Remote Copy” function)
- 6.13 F-codes
- 6.14 Using a confidential box (confidential transmission)
- 6.15 Registering a document on a bulletin board
- 6.16 Faxing from a computer (PC-FAX)
- 7 Useful reception functions
- 8 Polling
- 9 Registering/specifying settings
- 10 Utility mode
- 10.1 Overview of Utility mode parameters
- 10.2 Specifying User’s Choice settings
- 10.3 Specifying FAX Registration settings
- 10.4 Specifying User Management settings
- 10.5 Displaying the Administrator Management screen
- 10.6 Available parameters
- 10.7 Specifying the language for reports and the transmission source name (“Language for Communication” parameter)
- 10.8 Programming the telephone number (“Self-telephone # Information” parameter)
- 10.9 Programming a name (TSI Registration)
- 10.10 Registering the ID displayed on the recipient’s machine (“Self-ID” parameter)
- 10.11 Preventing changes to one-touch dial buttons
- 10.12 Specifying transmission settings (TX Settings)
- 10.13 Specifying the printing period for received documents (RX Settings)
- 10.14 Deleting confidential boxes
- 10.15 Specifying the reception mode and the number of rings (RX Functions)
- 10.16 Registering communication passwords
- 10.17 Specifying report output settings (Report Settings)
- 10.18 Forwarding sent documents to the specified recipient (TX Forwarding)
- 10.19 Specifying the procedure for received documents (Document Management)
- To specify the procedure performed with documents received on each line
- To specify the procedure performed with documents received on each line
- To specify the procedure performed with documents received with an F-code
- To specify the procedure performed with documents received with an F-code
- Specifying the procedure performed with other received documents
- To specify the procedure performed with other received documents
- 10.20 Specifying the self-registered domain name
- 10.21 Specifying the gateway transmission setting
- 10.22 Specifying software switch settings (machine functions)
- Software SW settings
- To specify a software switch setting
- Specifying settings for the stamp and password comparison (mode 000)
- Specifying settings for inserting the recipient’s name in the document (mode 001)
- Specifying printing of the memory clear report and the report for a broadcast transmission (mode 002)
- Specifying the storage time for failed transmission documents (mode 004)
- Specifying settings for general subscriber lines (mode 006)
- Specifying settings for receiving long documents (mode 007)
- Specifying the setting for selecting paper when printing received documents (mode 008)
- Specifying settings for the confirmation screen for broadcast transmissions (mode 014)
- Specifying whether or not a telephone is connected and whether or not a received date report is added and its format (mode 016)
- Specifying settings to limit dialing and broadcast transmissions (mode 018)
- Specifying settings for the image in the results report (Mode 023)
- Specifying the copy limitation with remote copying (mode 028)
- Specifying settings for fax reception functions (mode 030)
- Specifying the setting for tray selection of received faxes (mode 037)
- Specifying administrator forwarding settings (mode 198)
- Specifying settings for checked receiver transmissions (mode 200)
- Specifying settings for the number of rings until automatic reception (port 2) (mode 249)
- Blocking calls from callers that are not specified (mode 306)
- Specifying the Internet fax settings (mode 350)
- Specifying whether transmission source information is added when performing an IP relay operation or forwarding received documents (mode 352)
- Specifying settings for the information indicated in the report for IP relay transmissions (mode 368)
- Specifying settings for when copying is finished using the ADF (mode 429)
- Specifying settings to limit the use of communication modes-1 (mode 475)
- Specifying settings to limit the use of communication modes-2 (mode 476)
- Specifying settings to limit the use of communication modes-3/Specifying restrictions for registering fax addresses and printing reports and specifying how one-touch dial recipients are displayed (mode 477)
- Specifying the deleting method for [Del.] in input screens (mode 478)
- Specifying settings for limiting user authentication to only Scan functions (mode 479)
- 11 Specifying settings using PageScope Web Connection
- 11.1 Items that can be specified using PageScope Web Connection
- 11.2 Using PageScope Web Connection
- 11.3 One-touch key registration (User mode)
- 11.4 FAX Program Registration (User mode)
- 11.5 System (Administrator mode)
- 11.6 Export/Import (Administrator mode)
- 11.7 Line Settings (Administrator mode)
- 11.8 Transmission source registration
- 11.9 TX Settings (Administrator mode)
- 11.10 RX Settings (Administrator mode)
- 11.11 Fax Setting (Administrator mode)
- 11.12 RX Document (Administrator mode)
- 11.13 Report Output Settings (Administrator mode)
- 11.14 TCP/IP (Administrator mode)
- 11.15 Mail/Internet FAX (Administrator mode)
- 12 Reports and lists
- 12.1 Checking the transmission status (TX Report)
- 12.2 Checking the reception status (RX Report)
- 12.3 Checking the list of the registered one-touch dial buttons (One-Touch List)
- 12.4 Checking the list of fax programs (Program List)
- 12.5 Checking the bulletin board documents (Bulletin List)
- 12.6 Checking the contents of confidential boxes (Confidential List)
- 12.7 Checking the settings for each function (Setting List)
- 13 Appendix