Konica Minolta bizhub 222 - Manual (Page 121)

6 Useful transmission functions
6-22 362/350/282/250/222/200
Usef
ul tr
an
sm
ission
fu
nctio
n
s
Chap
te
r 6
6.11 Sending a fax with a password applied (“Password
TX” function)
Data can only be transmitted if this password is the same as the transmission
password registered with the recipient. Password transmission is used, for
example, to prevent the wrong recipient from receiving important docu-
ments.
To send faxes with a password applied
1
Press the [Fax/Scan] key to display the Fax mode screen.
2
Touch [FAX Menu].
3
Touch [FAX], and then
touch [Password TX].
– To cancel the func-
tion, touch the but-
ton again to deselect
it.
[Password TX] is high-
lighted.
4
Specify the recipient, and then load the document.
5
Press the [Start] key.
2
Note
Depending on the recipient’s fax machine, password transmissions may
not be received.
!
Detail
The sender and the recipient must specify the transmission password in
advance. For details, refer to “Registering communication passwords”
on page 10-46.
For details on password reception, refer to “Receiving a fax with a pass-
word applied (“Password RX” function)” on page 7-2.