Konica Minolta bizhub 222 - Manual (Page 324)

Specifying settings using PageScope Web Connection 11
362/350/282/250/222/200 11-41
Spe
c
if
ying
s
e
tt
ing
s
us
ing
Pa
ge
Sc
op
e
We
b C
o
n
n
e
c
tion
Ch
ap
te
r 11
To specify the processing of received documents per line
1
In the Administrator mode, click the [Fax/Scan] tab.
– For the procedure to log on to Administrator mode, refer to “Log-
ging on to Administrator mode” on page 11-8.
2
Click [RX Document], then [Port].
3
Click a port name (G3).
– If the optional fax multi line is being used, two general subscriber
lines can be used. Specify settings for each port: “G3-1” (port 1)
and “G3-2” (port 2).
– To specify settings for documents sent through the network (such
as Internet faxes), click [Network].
– If software switch settings were specified to block faxes received
from senders other than those specified, only the setting for “Net-
work” can be specified. For details on the software switch settings,
refer to “Specifying software switch settings (machine functions)”
on page 10-67.