Konica Minolta bizhub 222 - Manual (Page 263)

10 Utility mode
10-80 362/350/282/250/222/200
Utility mode
Chapter 10
Specifying whether or not a telephone is connected and whether or not
a received date report is added and its format (mode 016)
Specify whether or not a telephone is connected, and whether or not a re-
ceived date report is added and how it is formatted.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 0 1 0 0 0 0 0 0 (HEX: 40)
Bit Description Setting Description Page Refer-
ence
7 ----------------------- 0 *Do not change this bit
when specifying settings
for this function. ----------
6 Specifies whether or
not an external tele-
phone is connected. 0 Not used p. 2-31
1 Used
5, 4, 3, 2 ----------------------- 0000 *Do not change these bits
when specifying settings
for this function. ----------
1 Specifies whether or
not a received date
report is attached. 0 Not attached ----------
1 Attached
0 Specifies whether
the received date re-
port is attached out-
side or inside of the
image. 0 Attached within the im-
age ----------
1 Attached outside the im-
age