Konica Minolta bizhub 222 - Manual (Page 268)

Utility mode 10
362/350/282/250/222/200 10-85
Utility mode
Chapter 10
Specifying the setting for tray selection of received faxes (mode 037)
Specify whether the trays and bypass tray can be selected when printing re-
ceived faxes.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
(*1) Available only when the optional paper feed cabinet is installed.
(*2) Bits 7, 6, 5, 4 and 2 cannot all be set to “0”.
Bit 7 6 5 4 3 2 1 0
Setting 1 1 1 1 1 0 0 0 (HEX: F8)
Bit Description Setting Description Page Refer-
ence
7 Specifies whether or
not the 1st tray can
be selected when
printing received
faxes. 0 Cannot be selected (*2) p. 3-5
1 Can be selected
6 Specifies whether or
not the 2nd tray can
be selected when
printing received
faxes. 0 Cannot be selected (*2) p. 3-5
1 Can be selected
5 Specifies whether or
not the 3rd tray can
be selected when
printing received
faxes. (*1) 0 Cannot be selected (*2) p. 3-5
1 Can be selected
4 Specifies whether or
not the 4th tray can
be selected when
printing received
faxes. (*1) 0 Cannot be selected (*2) p. 3-5
1 Can be selected
3 ----------------------- 1 *Do not change this bit
when specifying settings
for this function. ----------
2 Specifies whether or
not the bypass tray
can be selected
when printing re-
ceived faxes. 0 Cannot be selected (*2) p. 3-5
1 Can be selected
1, 0 ----------------------- 00 *Do not change these bits
when specifying settings
for this function. ----------