Konica Minolta bizhub 222 - Manual (Page 355)

13 Appendix
13-4 362/350/282/250/222/200
Appe
nd
ix
Ch
apt
e
r 13
13.2 Replacing the stamp
When the printed stamps become faint, replace the stamp with spare TX
maker stamp 2 according to the procedure described below.
2
Note
The optional stamp unit must be installed in order to use the “Stamp”
function.
The spare TX maker stamp 2 is replaceable. Purchase it from your dealer
or technical representative.
To replace the stamp
1
Pull the lever for the mis-
feed-clearing cover, and
then open the cover.
2
Swing up the document
guide.